How To
PIVOT PLACEMENT FOR TENSIONING
CHANGING OF BLADES
1. Use any sturdy flat edge to remove c-clip
2. Slide the grooved pin out and remove the blade
3. Place new blade inside the frame and slide the grooved pin back through the outside hole
4. Use flat edge to snap the c-clip back over the grooved pin
5. Follow same instructions for the other end of the blade
USE & SAFETY
BOREAL saws have been designed with safety as a high priority. In the closed position, blade points are concealed within the saw frame, making packing and handling easy. Also, the one-piece design allows for folding, unfolding and tensioning while only holding the saw handle and plastic pivot arm - no need to contact the blade. However, when the BOREAL is open, the exposed blade points are extremely sharp and the saw must be handled with care.
